Oil change and oil filter change on Ford Fiesta VI - 1.0 Ecoboost

Loosen the oil pan plug using a ratchet and a 13 socket.

Remove the cap by hand

Place a basin or jerrycan to collect the oil

Using a filter wrench, unscrew the oil filter.

Finish unscrewing the oil filter by hand then remove it from its location

Place a pan under the oil filter

Compare the dimensions between the new oil filter and the old one

Lubricate the new filter with a little oil

Apply brake cleaner to the oil filter location, then dry with a rag

Replace the oil filter by hand in its location

Clean the drain plug location with a cloth.

Replace the drain plug by hand

Then using a ratchet and a 13 socket tighten the drain plug

Remove the engine oil cap and install a funnel

Pour about 4.5 liters of oil

Pull out the oil dipstick and wipe off the old level

Re-immerse the dipstick and check the level.

If the latter is correct, close the engine oil cap and re-insert the dipstick.

Start the engine, the oil change light should disappear from the dashboard