Video Overview
-
-
Place a bac or a basin under the oil pan
-
With the help of a 24 socket and a pawl, loosen the oil pan plug
-
Remove the cap and let the oil drain.
-
-
-
The oil filter is located in the engine compartment, between the engine and the radiator
-
Pleasure for a second bac under the filter location, oil will flow out when removing it
-
With the help of a pawl, of a extension and a 27 socket unscrew the oil filter bell
-
Remove the oil filter
-
-
-
Remove the filter from the bell by pulling on it
-
Compare the dimensions of the new filter with the old one
-
-
-
With the help of a small flat screwdriver remove the old gasket present on the bell
-
-
-
Clean the bell with brake cleaner
-
Lubricate the new gasket with clean engine oil
-
-
-
Use a oil syringe to remove the remaining oil in the oil filter location
-
Place the syringe tube into the tank
-
Then suck up the remaining oil
-
-
-
Screw the oil filter bell back into its location and screw it back in by hand.
-
Tighten the bell using the pawl and of the 27 socket
-
-
-
Once the oil has drained from the crankcase, clean up the drips with a rag.
-
Place the drain plug by hand, take the opportunity to change the joins
-
-
-
-
Pour approximately 3l of engine oil using a funnel
-
-
-
Once the correct amount has been poured, pull the dipstick and wipe the old level on a rag.
-
-
-
Put the gauge back into its location
-
Pull the dipstick a second time to check the oil level.
-
The latter must be slightly below the MAX
-
If the oil level is not correct, add more engine oil
-
-
-
Withdraw the funnel and replace the oil cap
-
Re-immerse the gauge
-
-
Cancel: I did not complete this guide.
6 other people completed this guide.