Install metal snow chains

Unpack the chains and lay them on the ground

Free the chains

Once the chain is on the ground, place the yellow chains on one side and the blue chains on the other.

While keeping this organization, place the chain behind the wheel

Bring the two ends of the chain together on top of the wheel

Hook the two ends together

Place the hook on the tire tread and make sure to keep it positioned

Place the chain on the tire

Hook the yellow chain with the blue chain

Reassemble the entire chain on the wheel and place the attachment system on the inner side

Close the inner part of the blue chain of the tensioner on the yellow hook on the left at the bottom of the wheel

Apply tension by pulling on the rubber strap and hooking it onto a link of the blue chain

Check the tension after rolling for about a hundred meters by pulling on the tensioner chain.

If necessary, use the yellow plastic hooks to hold the end of the tensioner chain if it is too loose.

The chain is correctly installed

To uninstall the snow chains, start by removing the tensioner chain

Release the tensioner chain by pressing the tensioner button

Unhook the blue chain from the yellow one

Unhook the yellow chain from the blue chain on the top of the wheel

Unhook the ends of the chain

Retrieve the chain by going around the wheel

For chains with the automatic tensioning system, the installation is similar

Except you have to push a button to lock or release the chain tension

The tension is done automatically while driving