Skip to main content
  1. 
The stabilizer bar is circled in red.

The silent blocks are held by protective aluminum housings.
    • The stabilizer bar is circled in red.

    • The silent blocks are held by protective aluminum housings.

  2. 
Remove the 2 nuts with a 13 socket.

Remove the aluminum protective cover by pulling on it.

Slide the silentbloc out and remove it.
    • Remove the 2 nuts with a 13 socket.

    • Remove the aluminum protective cover by pulling on it.

    • Slide the silentbloc out and remove it.

  3. 
Reassembly is done in the reverse order.

Reassembly is done in the reverse order.
    • Reassembly is done in the reverse order.

Finish Line

2 other people completed this guide.

laurent.immo13003

Member since: 03/03/2016

12,942 Reputation

155 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 2,089