Skip to main content

Introduction

Warm up the engine before draining

  1. 
Open the engine hood

Remove the oil dipstick and cap

Remove the oil dipstick and cap
    • Open the engine hood

    • Remove the oil dipstick and cap

  2. 
Open the engine cover to access the drain plug by removing the 3 clips

Open the engine cover to access the drain plug by removing the 3 clips

Open the engine cover to access the drain plug by removing the 3 clips
    • Open the engine cover to access the drain plug by removing the 3 clips

  3. 
Unscrew the drain plug using the 14 wrench.

Let it flow drop by drop

Let it flow drop by drop
    • Unscrew the drain plug using the 14 wrench.

    • Let it flow drop by drop

  4. 
Replace the drain plug by changing the drain gasket

tighten it using the 14 key
    • Replace the drain plug by changing the drain gasket

    • tighten it using the 14 key

  5. 
Remove the oil filter using the strap wrench

Remove the oil filter using the strap wrench
    • Remove the oil filter using the strap wrench

  6. 
Disassemble the oil filter

Disassemble the oil filter
    • Disassemble the oil filter

  7. 
Compare the two filters

Compare the two filters
    • Compare the two filters

  8. 
Replace the seal

Install the new oil filter

Install the new oil filter
    • Replace the seal

    • Install the new oil filter

  9. 
Reinstall the oil filter

Reinstall the oil filter

Reinstall the oil filter
    • Reinstall the oil filter

  10. 
Replace the plate under the engine by installing the 3 clips

Replace the plate under the engine by installing the 3 clips
    • Replace the plate under the engine by installing the 3 clips

  11. 
Pour the oil into the engine

Replace the dipstick and cap

Start the engine
    • Pour the oil into the engine

    • Replace the dipstick and cap

    • Start the engine

    • Recheck the level

    • DO NOT EXCEED MAX LEVEL

  12. 
Locate the air filter
    • Locate the air filter

  13. 
Unclip the two clips

Open the air box to access the filter

Open the air box to access the filter
    • Unclip the two clips

    • Open the air box to access the filter

  14. 
Remove the air filter

Remove the air filter
    • Remove the air filter

  15. 
Check that the new filter matches

Check that the new filter matches
    • Check that the new filter matches

  16. 
Install the new filter in the air box

Install the new filter in the air box
    • Install the new filter in the air box

  17. 
Closed the air box
    • Closed the air box

    • Clip the two legs together

  18. 
The cabin filter is located behind the glove box.

Open the glove box

Squeeze both sides of the glove box to remove it from its housing
    • The cabin filter is located behind the glove box.

    • Open the glove box

    • Squeeze both sides of the glove box to remove it from its housing

  19. 
Open the filter box by pulling on the tab

Remove filter

Remove filter
    • Open the filter box by pulling on the tab

    • Remove filter

  20. 
Check that the new filter matches
    • Check that the new filter matches

  21. 
Install the new filter in its location

Install the new filter in its location

Install the new filter in its location
    • Install the new filter in its location

  22. 
Reclip the filter cover

Close the glove box

Close the glove box
    • Reclip the filter cover

    • Close the glove box

Finish Line

One other person completed this guide.

dlychar

Member since: 10/09/2017

10,314 Reputation

70 Guides authored

One Comment

Good morning,

there is no fuel filter? Because on oscaro they are available for the prius plus

r.yagic - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 51

All Time: 4,358