Introduction
Here's how to access and replace the air filter on your Citroën Nemo 1.3L HDI 75CV
Parts
-
-
The ideal tool is a 7mm hex socket, a ratchet wrench and a small extension. Failing that, a 7mm flat wrench and possibly a Phillips screwdriver will do the trick.
-
During this operation, you will have to unscrew 4 screws, open the filter housing, remove the filter, replace it and close the housing.
-
-
-
Open Nemo's hood by pulling the control to the left of the clutch pedal towards you.
-
Pass your hand under the hood at the logo level, you have to move a yellow control to the left which unlocks the total opening. Push the hood upwards, it will be held by a self-locking system.
-
-
-
The air filter housing is closed by means of 4 7mm hexagonal socket head screws. These should be unscrewed using the tools indicated above.
-
-
-
Open the case to access the filter.
-
-
-
Remove the air filter from its location
-
Compare the dimensions between the old and the new air filter
-
Clean the impurities present in the air box with a blower
-
Replace the new air filter in its location, making sure that the filter is properly inserted.
-
-
-
Close the filter housing: first wedge the 4 locations at the bottom, then screw the 4 screws at the front
-
Close the hood. To do this, pull the red control towards you and lower the hood and close it until you hear the "click"
-
Cancel: I did not complete this guide.
One other person completed this guide.