Introduction
Changing a windscreen washer pump on a 205 Peugeot 1.4 60hp (TU engine)
It's easy... even when you don't know anything about mechanics!
No tools required, just a little dexterity.
Tools
Parts
-
-
Locate the Windshield Washer Reservoir
-
If the tank contains windshield washer fluid, remember to put a container under the car to collect it.
-
-
-
Detach the pump from the tank. Simply pull gently but firmly on it.
-
Be careful not to damage the seal between the pump and the tank.
-
The windshield washer fluid will flow out but normally you have put a container under the car.
-
-
-
Take your new pump.
-
Reconnect the nozzle supply hose.
-
Reconnect the power supply terminal.
-
Insert the pump into the windshield washer fluid reservoir.
-
Again, pay close attention to the seal between the pump and the tank.
-
-
-
You're done!
-
Test by turning the ignition key and pressing the windshield washer lever.
-
Normally you should have windshield washer fluid on your windshield!
-
Cancel: I did not complete this guide.
2 other people completed this guide.
