Changing the tail light bulbs on a Renault Clio 3

Use the torx screwdriver to remove the 3 screws from the tail light

Lift the tail light to access the connectors

With the help of a flat screwdriver, disconnect the connector

Push the plastic tabs slightly to remove the bulb holder plate.

Turn the bulb a quarter turn counterclockwise

Pull the bulb to remove it

P21/5W type brake light bulb

P21W type reverse light bulb

PY21W type turn signal bulb

Remove the bulb(s) to be changed

Align the notch on the bulb with the notch on the plate and insert the bulb.

Turn a quarter turn clockwise

Position the bulb holder plate by aligning the bulbs with the holes in the rear light

Connect the connectors

Align the tail light nipples with the holes provided for this purpose on the fender

Screw the torx screws into their housing using the torx screwdriver

Test bulbs that have been changed to verify that they are working properly.