Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the rear trunk struts Porsche Boxster

Written By: Tanguy de Carcouet (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 2

Difficulty

Very easy

Steps

5

Time Required

00:10:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

5 steps:

- Compare old and new cylinders

- Hold the trunk open using a wedge

- Dismantling of the 2 old jacks

- Reassembly of the 2 new cylinders

- Checking for proper operation

  1. Compare old and new cylinders to check compatibility

    • Compare old and new cylinders to check compatibility

    Edit

  2. Put a wedge to hold the rear trunk open

    • Put a wedge to hold the rear trunk open

    Edit

  3. Slide the metal clip on the jack attachment upwards to release the attachment by levering it with a screwdriver. Slide the metal clip on the jack attachment upwards to release the attachment by levering it with a screwdriver.

    • Slide the metal clip on the jack attachment upwards to release the attachment by levering it with a screwdriver.

    Edit

  4. Prepare the new jacks to facilitate installation and then put the clip back at the bottom Prepare the new jacks to facilitate installation and then put the clip back at the bottom

    • Prepare the new jacks to facilitate installation and then put the clip back at the bottom

    Edit

  5. Once the 4 clips are locked, check that the trunk holds securely in the high position.

    • Once the 4 clips are locked, check that the trunk holds securely in the high position.

    Edit
Finish Line

2 other people completed this guide.

Author

with 1 other contributor

Tanguy de Carcouet

Member since: 06/12/2018

112 Reputation

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 5

All Time: 692

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.