Introduction
Vehicle engine 1.9 D 70cv
Peugeot 306 sedan
Tools
-
-
A broken light does not allow you to pass the technical inspection without a mandatory second inspection.
-
Open the trunk of the vehicle to access the back of the light.
-
-
-
Unscrew the two triangular plastic nuts on the back of the light.
-
Remove the protective cover to access the electrical connectors.
-
-
-
Push the small black tabs to disconnect the electrical plugs.
-
Take the fire out of its housing.
-
-
-
Set up the new fire.
-
Check that the headlight is properly seated in its location to avoid a leak.
-
Reconnect the electrical connections.
-
-
-
Replace the protective cover.
-
Tighten the two nuts.
-
Check for proper operation.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
