Skip to main content
  1. 
Identify the faulty light

Unscrew the two size 20 torx screws

Unscrew the two size 20 torx screws
    • Identify the faulty light

    • Unscrew the two size 20 torx screws

  2. 
To remove the light, pull it towards the rear of the vehicle to release it from its lugs.

Run a string between the light and the bodywork

Pull the string towards the rear of the vehicle
    • To remove the light, pull it towards the rear of the vehicle to release it from its lugs.

    • Run a string between the light and the bodywork

    • Pull the string towards the rear of the vehicle

    • 2 lugs clipped into the bodywork

    • 2 screws fixed in the bodywork

  3. 
Slide a screwdriver under the tab and pry toward the outer side of the socket

Then pull the plug

Then pull the plug
    • Slide a screwdriver under the tab and pry toward the outer side of the socket

    • Then pull the plug

  4. 
Check the dimensions of the new fire

Check the connection which must be identical
    • Check the dimensions of the new fire

    • Check the connection which must be identical

  5. 
Restore the fire and check that it is working properly.
    • Restore the fire and check that it is working properly.

Finish Line

One other person completed this guide.

Félix DELANOE

Member since: 04/23/2016

5,059 Reputation

32 Guides authored

4 Comments

Thanks for the string tip, it helped me a lot, the lug wouldn't unclip without the string.

Florian PICQUET - Reply

Thank you very much FD I will try

Lakhdar Belaid - Reply

Good morning,

Here you will find the info for a Clio 2, I think the color code remains unchanged:

http://www.forum-clio.com/index.php?acti...

Kind regards, FD

Félix DELANOE - Reply

Good evening, I would like to know the role of each wire on the spindle sheet please.

Black . Green .orange . Blue

Thank you so much

Lakhdar Belaid - Reply

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 37

Past 30 Days: 199

All Time: 15,331