Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the rear light - Renault Clio 3

Written By: thibaut.ansaldi (and one other contributor)
  • Comments: 4
  • Favorites: 0
  • Completions: 1

Difficulty

Very easy

Steps

9

Time Required

00:10:00

Sections

1

Flags

0

Introduction

This tutorial is made on a Clio III Phase 2 1.5 dCi 86 cv

Video Overview

  1. Open the rear trunk Locate the three screws holding the tail light Locate the three screws holding the tail light

    • Open the rear trunk

    • Locate the three screws holding the tail light

    Edit

  2. Using a Torx T 20 key, unscrew the 3 screws holding the rear light Using a Torx T 20 key, unscrew the 3 screws holding the rear light Using a Torx T 20 key, unscrew the 3 screws holding the rear light

    • Using a Torx T 20 key, unscrew the 3 screws holding the rear light

    Edit

  3. Carefully pull the tail light, be careful the connector is plugged in Carefully pull the tail light, be careful the connector is plugged in Carefully pull the tail light, be careful the connector is plugged in

    • Carefully pull the tail light, be careful the connector is plugged in

    Edit

  4. Using a flat screwdriver, disconnect the connector located behind the light. Using a flat screwdriver, disconnect the connector located behind the light. Using a flat screwdriver, disconnect the connector located behind the light.

    • Using a flat screwdriver, disconnect the connector located behind the light.

    Edit

  5. Compare the old and new tail light (dimensions, lugs, connector socket) Compare the old and new tail light (dimensions, lugs, connector socket) Compare the old and new tail light (dimensions, lugs, connector socket)

    • Compare the old and new tail light (dimensions, lugs, connector socket)

    Edit

  6. Reconnect the connector Reconnect the connector Reconnect the connector

    • Reconnect the connector

    Edit

  7. Replace the new tail light and insert it into the two lugs Replace the new tail light and insert it into the two lugs Replace the new tail light and insert it into the two lugs

    • Replace the new tail light and insert it into the two lugs

    Edit

  8. Replace and tighten the 3 screws holding the rear light Replace and tighten the 3 screws holding the rear light Replace and tighten the 3 screws holding the rear light

    • Replace and tighten the 3 screws holding the rear light

    Edit

  9. Check that the bulbs are working properly Check that the bulbs are working properly Check that the bulbs are working properly

    • Check that the bulbs are working properly

    Edit
Finish Line

One other person completed this guide.

Author

with 1 other contributor

thibaut.ansaldi

Member since: 11/23/2014

83,984 Reputation

196 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

4 Comments

I would like my comment not to appear with my email address. Thank you.

ginette_fluxench - Reply

Hello, thank you for this very well explained tutorial.

ginette_fluxench - Reply

Very well explained disassembly and reassembly video, perfectly clear, thank you

Francis LEFEBVRE - Reply

Good morning,

Thank you so much !

The Oscaro team

thibaut.ansaldi -

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 65

All Time: 5,554

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.