Introduction
This tutorial explains how to change the engine mount on a Volkswagen Polo III 1.3 i 55cv
Tools
Parts
Video Overview
-
-
-
The rear engine mount is located under the vehicle
-
Loosen the 3 screws on the rear part of the support placed on the engine cradle
-
-
-
Using the 16 flat wrench and a 16 socket wrench, loosen and remove the bolt.
-
Remove the nut then the screw placed at the front of the support
-
Remove the engine mount
-
-
-
Compare the dimensions and shape of the old and new engine mounts
-
Clean the location of the rear engine mount with a cloth.
-
A leak of gearbox oil is probably the cause of premature wear of the rubbers of the support
-
-
-
position the three engine mount screws on the cradle before locking them, then finish locking the bolt on the gearbox
-
you will probably have to rock the engine to help position the three bracket screws by gripping it by the oil pan or exhaust pipe
-
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
