Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the passenger compartment air blower on Peugeot 306 phase 3

Written By: laurent.immo13003 (and one other contributor)
  • Comments: 1
  • Favorites: 1
  • Completions: 3

Difficulty

Very easy

Steps

4

Time Required

00:30:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

Intervention carried out on a Peugeot 306 phase 3 1.8 16V petrol engine

  1. On this model it is located under the glove box.

    • On this model it is located under the glove box.

    Edit

  2. The cover is secured by 3 plastic hooks. Simply pull on it to remove it. The cover is secured by 3 plastic hooks. Simply pull on it to remove it. The cover is secured by 3 plastic hooks. Simply pull on it to remove it.

    • The cover is secured by 3 plastic hooks. Simply pull on it to remove it.

    Edit

  3. Disconnect the connector. Using a Torx T20 screwdriver remove the 4 screws. Pull the pulser to remove it.

    • Disconnect the connector.

    • Using a Torx T20 screwdriver remove the 4 screws.

    • Pull the pulser to remove it.

    Edit

  4. Old room New part Reassembly is carried out in reverse order.

    • Old room

    • New part

    • Reassembly is carried out in reverse order.

    Edit
Finish Line

3 other people completed this guide.

Author

with 1 other contributor

laurent.immo13003

Member since: 03/03/2016

12,942 Reputation

155 Guides authored

One Comment

Impeccable! Didn't even need to change the blower, it was just a little seized up.

Serge Sauton - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 67

All Time: 8,854

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.