Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the indicator bulb - Peugeot 306

Written By: hemissi-nizar (and one other contributor)
  • Comments: 1
  • Favorites: 1
  • Completions: 3

Difficulty

Easy

Steps

7

Time Required

00:10:00

Sections

1

Flags

0

Introduction

Vehicle engine 1.9 D 70cv

  1. Open the hood Changing the bulb requires removing the turn signal light

    • Open the hood

    • Changing the bulb requires removing the turn signal light

    Edit

  2. It is held in place by a locking lever attached to the main projector Press the lever to unlock it Push the flashing light from the rear, passing your hand through the fender, to slide it outwards

    • It is held in place by a locking lever attached to the main projector

    • Press the lever to unlock it

    • Push the flashing light from the rear, passing your hand through the fender, to slide it outwards

    Edit

  3. Slightly remove the light from its housing to access the electrical connections. Disconnect the electrical connector Disconnect the electrical connector

    • Slightly remove the light from its housing to access the electrical connections.

    • Disconnect the electrical connector

    Edit

  4. Rotate the lamp holder a quarter turn to remove it. Rotate the lamp holder a quarter turn to remove it. Rotate the lamp holder a quarter turn to remove it.

    • Rotate the lamp holder a quarter turn to remove it.

    Edit

  5. Remove the faulty bulb a quarter turn and put in the new one.

    • Remove the faulty bulb a quarter turn and put in the new one.

    Edit

  6. Replace the lamp holder Replace the lamp holder

    • Replace the lamp holder

    Edit

  7. Connect the electrical connector Insert the flashing light and push until it locks Insert the flashing light and push until it locks

    • Connect the electrical connector

    • Insert the flashing light and push until it locks

    Edit
Finish Line

3 other people completed this guide.

Author

with 1 other contributor

hemissi-nizar

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

One Comment

Good morning,

This tutorial is for the 306 ph 1, I have a 306 ph 2. Does anyone have a tutorial for more recent models?

Maxime Lalaux - Resolved on Release Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 23

All Time: 4,329

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.