Video Overview
-
-
Remove the air intake
-
To remove the exhaust pipe, unscrew the 10 bolt with the ratchet then remove the two clips
-
Unscrew and unclip the cover where the glow plugs are located.
-
Remove the engine cover bracket
-
-
-
Disconnect the four spark plugs by pulling upwards
-
Clean the spark plug wells using a blower
-
Carefully loosen the spark plugs and then remove them.
-
-
-
Check the correspondence between the new and old spark plugs (electrodes, size, thread, connectors)
-
-
-
Screw the 4 spark plugs back in
-
Replace the 4 connections
-
Replace the cover
-
Reattach the cache support
-
Replace the exhaust pipe
-
Reinstall the air intake
-
Replace the last cover
-
To check, start the engine.
-
Cancel: I did not complete this guide.
9 other people completed this guide.
Team
7 Comments
Hello, it is best to leave the locking clips partially mounted on the hose to avoid losing them when reassembling (it is complicated to access the end of the hose to reassemble the clip blindly)
Hello, I have a problem, when I drive the car in 2nd or 3rd gear the car has more power, it seems like it chokes at times on a Clio 3, could you give me some information and give me some advice.
Good morning,
It would also be necessary to specify the tightening torque to be respected for the spark plugs, because overtightening them means guaranteed breakage...
Cdt
Good morning,
Here is the link: https://pieces-auto.oscaro.com/faisceau-...
Yours sincerely,
The Oscaro Team
