Video Overview
-
-
Placer the bin under the car
-
Remove the tab by unscrewing using the'a 10 socket wrench
-
-
-
Unclip the sensor
-
Unclip the three hoses from the diesel filter
-
Using your key fuel filter and your ratchet unscrews the diesel filter
-
Remove the fuel filter
-
-
-
Unscrew the two 10 screws
-
Carefully remove the fuel filter base
-
Empty the impurities into the tray
-
Clean the base with a rag
-
-
-
Unscrew the filter
-
Check the correspondence between the old and new fuel filter
-
Screw the new fuel filter back on
-
Replace the seal on the base
-
-
-
Fill the fuel filter tank with 30 cl of diesel to facilitate priming.
-
Reposition your fuel filter in its base
-
Tighten the 2 screws to reposition the fuel filter
-
-
-
Using the fuel filter wrench and your ratchet tighten the fuel filter
-
Reattach the 3 fuel filter hoses
-
Reconnect the plug
-
Reposition the fixing bracket by screwing it back in with the 10mm socket wrench.
-
Turn on the ignition for 20 seconds then start the engine
-
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
5 Comments
Hello, do you sell this tool please?
Mickael Briand - Resolved on Release Reply
Good morning ,
We sell all the tools needed for this tutorial. Just click on the tool links at the beginning of this tutorial.
Best regards and good luck.
The Oscaro team
Good morning,
I just watched your tutorial, it's very clear and ultimately not complicated to do.
Congratulations to your colleagues, you are the best!!
Jean LIPKO 13:07:2017
Jean LIPKO - Resolved on Release Reply
Thank you for your comment and compliment.
Good for you if this helped you with changing the fuel filter.
Best regards,
The Oscaro Team
Good morning,
Thank you for this tutorial which made my task much easier. I would like to point out that for step 2 you do not necessarily need a fuel filter wrench associated with a ratchet, which is difficult to find in stores. You can use a simple oil filter wrench, surround the diesel filter cover, tighten well and turn several times in a row. You will finish unscrewing it by hand. Same for reassembly.
Erwan Bourhis - Resolved on Release Reply
