Skip to main content

Introduction

How to change the fuel filter on your Alfa Romeo 147 1.9 JTD

Video Overview

  1. The fuel filter is located under the windshield bay, behind the engine Remove the hose clamp located above the filter using a Phillips screwdriver. Remove the hose clamp located above the filter using a Phillips screwdriver.
    • The fuel filter is located under the windshield bay, behind the engine

    • Remove the hose clamp located above the filter using a Phillips screwdriver.

  2. Place a rag under the hose to avoid getting fuel everywhere. Remove the fuel hose Remove the fuel hose
    • Place a rag under the hose to avoid getting fuel everywhere.

    • Remove the fuel hose

  3. Remove the hose from the clip to facilitate access to the filter Remove the cloth Remove the cloth
    • Remove the hose from the clip to facilitate access to the filter

    • Remove the cloth

  4. Using a filter wrench, unscrew the fuel filter Using a filter wrench, unscrew the fuel filter Using a filter wrench, unscrew the fuel filter
    • Using a filter wrench, unscrew the fuel filter

  5. Unclip the sensor plugged under the filter using a flat screwdriver Unclip the sensor plugged under the filter using a flat screwdriver Unclip the sensor plugged under the filter using a flat screwdriver
    • Unclip the sensor plugged under the filter using a flat screwdriver

  6. Remove the filter from its location Pay attention to the seal on the top of the filter Pay attention to the seal on the top of the filter
    • Remove the filter from its location

    • Pay attention to the seal on the top of the filter

  7. Compare the dimensions of the new filter with the old one Compare the dimensions of the new filter with the old one
    • Compare the dimensions of the new filter with the old one

  8. Remove the cap at the bottom of the old filter by unscrewing it Remove the cap at the bottom of the old filter by unscrewing it
    • Remove the cap at the bottom of the old filter by unscrewing it

  9. Apply oil to the two gaskets on the top of the new filter Apply oil to the two gaskets on the top of the new filter
    • Apply oil to the two gaskets on the top of the new filter

  10. Replace the new filter in its location and screw it back in. Replace the new filter in its location and screw it back in. Replace the new filter in its location and screw it back in.
    • Replace the new filter in its location and screw it back in.

  11. Replace the sensor under the new filter Replace the sensor under the new filter
    • Replace the sensor under the new filter

  12. Feed the hose through the clip Place the clamp on the hose Place the clamp on the hose
    • Feed the hose through the clip

    • Place the clamp on the hose

  13. Tighten the collar using the Phillips screwdriver Your filter is mounted Your filter is mounted
    • Tighten the collar using the Phillips screwdriver

    • Your filter is mounted

  14. Start the car several times to get the fuel to the filter before driving.
    • Start the car several times to get the fuel to the filter before driving.

Finish Line

dylan.leviavant

Member since: 12/06/2016

527,102 Reputation

94 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

4 Comments

the pictures don't seem to match a 1.9 jtd..

blazy.13015 - Reply

Good morning,

The layout of the 1.9 JTD is probably not the same between the 120 and 140hp but this can also depend on the model, a 1.9 JTD will probably not be placed in the same way in an Alfa 147 as an Alfa 156.

Good day

dylan.leviavant -

Hello, I have a 1.9 JTD 140hp and the engine is totally different (They are weird at Alfa Romeo..) all complicated when you can make it simple..

blazy.13015 -

Hello Jeremy,

The operation was carried out on the 1.9 JTD 120hp of an Alfa Romeo 147.

Yours sincerely,

dylan.leviavant -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 17

All Time: 4,502