Tools
Parts
-
-
Place a piece of cardboard on the front windshield
-
Remove the wiper blade by unclipping it from the arm by pressing the tab downwards then pulling towards the end of the arm
-
Do the same on the passenger side
-
-
-
Check the correspondence between the old and the new wiper blades (length, hooks...)
-
-
-
Clip the new wiper blade onto the arm
-
Check that the arm is properly clipped to the control hole
-
Perform the same operation on the passenger side windshield wiper.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
2 Comments
On Megane 3, replacing the windscreen wipers is made much easier by putting them in the correct position, i.e.: ignition on, engine off, by placing the windscreen wiper stalk on the maximum speed (all the way down), the arms will go into a vertical position. It will thus be much easier to lift them, without risk of damaging the edge of the engine hood.
Good morning,
You are absolutely right, I did not use this function at the time. It is done now. Thank you for your contribution.
You can modify this tutorial by clicking "Edit" to make it better for the enjoyment of future users.
Sincerely.
