Changing the front wiper blade Toyota Yaris 3

As you can see there is only one wiper, to change it it is more practical to put it as in photo 2.

To put it like this, turn on the windshield wiper and turn off the ignition, at the desired position.

Measure that the new wiper blade matches the one you are going to install.

Using a thin screwdriver, lift the small tab.

Push the wiper down.

Raise the wiper arm and remove the blade with its support.

|To avoid leaving marks on the windshield, place a cloth or cardboard.

The old broom on the left, the new one on the right.

Slightly lift the wiper arm, insert the blade and push it upwards.

With the broom in place, fold down the retaining tab.

Check that the leg is in place

Remove the blade guard from the broom.

There you go, your windshield wiper is changed.

Turn the ignition back on and the arm returns to its place.