Changing the front indicator lights on Peugeot 106 phase 1

The turn signal light has become dull over time and due to weather conditions.

The fire is held by a hook spring from behind

With the help of a flat screwdriver, pull the hook to unhook it

Let the spring relax

Simply pull the fire from the front to remove it from its location.

Be careful not to pull too hard, the light is still connected to the harness

Rotate the beam 45° to unlock it

Pull it to disconnect it

Do not touch the bulb with your hands.

Compare the dimensions and assembly quality of the new light with the old one

Check that it is the correct side, headlights and lights are sold by side, from the driver's seat

Retrieve the fixing spring from the old light

Replace the fixing spring on the new light

Replace the turn signal bulb harness in the light

Rotate the beam 45° to lock it

Replace the fire in its location

Be careful to present the guide well

Pull the fixing spring to tension it

Insert the hook into the hole to leave the spring under tension, so as to hold the turn signal light