Changing the front and rear ceiling light bulbs - Peugeot 307

For unclip the transparent cover of front ceiling light, sit down at driver's side seat to be as close as possible to the ceiling light.

Grab the left side from the ceiling light while pulling towards you, use your second hand to leverage and unclip the transparent cover.

If your fingers don't fit, use un petit tournevis flat to leverage and help you unfold it.'''

You now have the transparent plastic window in the hand.

We can now distinguish 3 ampoules for the front ceiling light.

For remove a light bulb, catch it with your fingers Then to pull by making a right to left effect to unclip it.

The front ceiling light has 3 bulbs called W5W or T10.

Remember to turn off the lights of your ceiling light before handling any bulb to avoid any malfunction.

You can now replaced the bulb in the same direction that you removed it then check its operation by turning on the ceiling light using the button.

If a bulb does not light up, it is necessary to replace it. remove by putting it in the opposite direction to reverse the negative and positive terminals.

Once the bulbs installed and the checking the operation of the bulbs made.

Replace the plastic cover transparent one face of the ceiling light in respecting its meaning, Then press firmly on each side to clip it.

The bulbs in your ceiling light are now functional.

For change the rear ceiling light bulbs, sit in the middle seat at the back of the car for simplicity.

Grab the left side from the ceiling light while pulling towards you, use your second hand to leverage and unclip the transparent cover.

If your fingers don't fit, use a small flat screwdriver to pry it up and help you unclamp it.

You now have the transparent plastic window in the hand.

We can now distinguish 3 bulbs for rear ceiling light, However for my part there is only one bulb placed in the middle to avoid it being too bright at night.

For remove a light bulb, catch it with your fingers Then to pull by making a right to left effect to unclip it.

The rear ceiling light has 3 bulbs called W5W or T10.

Remember to turn off the lights of your ceiling light before handling any bulb to avoid any malfunction.

You can now replaced the bulb in the same direction that you removed it then check its operation by turning on the ceiling light using the button.

If a bulb does not light up, it is necessary to replace it. remove by putting it in the opposite direction to reverse the negative and positive terminals.

Once the bulbs installed and the checking the operation of the bulbs made.

Replace the plastic cover transparent one face of the ceiling light in respecting its meaning, Then press firmly on each side to clip it.

The bulbs in your ceiling light are now functional.