Skip to main content
  1. 
Pull the engine hood release control

Under the hood, to open it completely, pull up on the control located above the Volkswagen logo

Under the hood, to open it completely, pull up on the control located above the Volkswagen logo
    • Pull the engine hood release control

    • Under the hood, to open it completely, pull up on the control located above the Volkswagen logo

  2. 
On the upper ball joint, place a flat screwdriver in the notch

Then lever to remove the clips.

Hold it firmly to avoid losing it when removing it.
    • On the upper ball joint, place a flat screwdriver in the notch

    • Then lever to remove the clips.

    • Hold it firmly to avoid losing it when removing it.

  3. 
On the lower ball joint, place the screwdriver in the notch.

Leverage while holding the clips
    • On the lower ball joint, place the screwdriver in the notch.

    • Leverage while holding the clips

  4. 
Lock the hood in the open position before removing the jack.
    • Lock the hood in the open position before removing the jack.

  5. 
Reinstall the cylinder

Put the 2 clips back

Put the 2 clips back
    • Reinstall the cylinder

    • Put the 2 clips back

Finish Line

4 other people completed this guide.

Félix DELANOE

Member since: 04/23/2016

5,059 Reputation

32 Guides authored

One Comment

Hello

Quick and well done, thank you

very easy and cheap

gerard Doux - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 17

Past 30 Days: 126

All Time: 5,835