Skip to main content
  1. 
Remove the ceiling light using a flat screwdriver

Remove the ceiling light using a flat screwdriver

Remove the ceiling light using a flat screwdriver
    • Remove the ceiling light using a flat screwdriver

  2. 
Remove the ceiling light

Disconnect the connector

Disconnect the connector
    • Remove the ceiling light

    • Disconnect the connector

  3. 
Turn the bulb to the left to unclip it.

Then lift upwards to dislodge the bulb

Then lift upwards to dislodge the bulb
    • Turn the bulb to the left to unclip it.

    • Then lift upwards to dislodge the bulb

  4. 
Compare bulbs (base, capacity, etc.) This is a W5W

Compare bulbs (base, capacity, etc.) This is a W5W
    • Compare bulbs (base, capacity, etc.) This is a W5W

  5. 
Rotate the bulbs a quarter turn clockwise then push down.

Rotate the bulbs a quarter turn clockwise then push down.
    • Rotate the bulbs a quarter turn clockwise then push down.

  6. 
Connect the connector

Connect the connector

Connect the connector
    • Connect the connector

  7. 
Insert the ceiling light into its housing by clipping it.

Insert the ceiling light into its housing by clipping it.
    • Insert the ceiling light into its housing by clipping it.

Finish Line

3 other people completed this guide.

quent-v

Member since: 03/18/2017

587 Reputation

10 Guides authored

One Comment

Now I can say I have seen the light!

mvernierk - Resolved on Release Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 18

All Time: 2,320