Difficulty
Easy
Steps
7
Time Required
00:15:00 - 00:30:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
This tutorial shows you how to replace the camshaft position sensor on a 2009 Ford Fiesta VI 1.4 TDCi.
Parts
-
-
The camshaft position sensor is located on the right side of the cylinder head cover.
-
-
-
Using a flat screwdriver, press the tab on the plastic clip then pull the connector backwards.
-
-
-
Using a T30 Torx wrench, unscrew the screw that holds the sensor to the cylinder head cover.
-
Retrieve the screw, being careful not to drop it.
-
-
-
Check that the new sensor matches the old one both in terms of its attachment and the electrical connector.
-
-
-
Clean the sensor location with a cloth.
-
Position the sensor on the cylinder head cover and insert it correctly.
-
Insert the screw by hand and tighten it with the torx key.
-
-
-
Reconnect the connector, making sure to clip it securely.
-
Cancel: I did not complete this guide.
One other person completed this guide.
