Changing the cabin filter on a Mercedes Vito

To be able to access the air filter on your Mercedes Vito, you will have to open your hood.

For that, open your driver's side door Then below the handle to remove the handbrake, you will find a red tab that you have to pull towards you.

Once your open hood, you will find the cabin filter cover in under the windshield wipers And above the air box.

You will have to unclip the plastic cover to help a small flat-blade screwdriver or plastic utensil, start at the bottom of the plastic.

On the plastic cover you have 4 clips which is located on the bottom of the plastic.

You now have a metal bar that protects the cabin filter, use a screwdriver with a Torx 20 bit For to be able to unscrew them completely.

Think about put the screws in a jar For don't lose them because they are small.

The handle serves you to open the hatch For access the cabin filter in pulling on it.

Your air filter is in the accommodation, you simply have to remove it and then put the new one in its place respecting its meaning.

I couldn't take a picture of the cabin filter because I didn't have one and there wasn't one in the housing, this is a tutorial to show you how to do it because it's a business utility.

Once the cabin filter changed, put it back cabin filter protection bar.

You can now screw back in with the 2 small screws with a Torx 20 screwdriver without squeezing too hard, to do not damage the screw thread.

You can now replace the cabin filter cover, you will simply need to put from the top first.

Then press hard on the down for the clips to snap into place.