Skip to main content

Introduction

This tutorial allows you to change the cabin filter of a Honda Civic VIII 2.2 i-CDTi 16V 140hp

  1. 
The cabin filter is located in a compartment behind the center console. Access to it is from the passenger side at the location indicated by the red circles in the photos

The cabin filter is located in a compartment behind the center console. Access to it is from the passenger side at the location indicated by the red circles in the photos
    • The cabin filter is located in a compartment behind the center console. Access to it is from the passenger side at the location indicated by the red circles in the photos

  2. 
Pull the bottom panel of the storage compartment downwards at the locations indicated by the red arrows.

The clips are not very hard and do not normally require pliers to extract the panel.

Be careful to shoot close to them so as not to break them.
    • Pull the bottom panel of the storage compartment downwards at the locations indicated by the red arrows.

    • The clips are not very hard and do not normally require pliers to extract the panel.

    • Be careful to shoot close to them so as not to break them.

  3. 
Pull the lever circled in red towards you to open the door of the compartment containing the filter.

Pull the lever circled in red towards you to open the door of the compartment containing the filter.

Pull the lever circled in red towards you to open the door of the compartment containing the filter.
    • Pull the lever circled in red towards you to open the door of the compartment containing the filter.

  4. 
Pull the filter towards you to remove it from its compartment.

Be careful to note the direction of this when dismantling.
    • Pull the filter towards you to remove it from its compartment.

    • Be careful to note the direction of this when dismantling.

    • Remove dead leaves and dirt from inside the compartment before installing the new filter.

  5. 
To enter le nouveau filtre d'habitacle in the compartment you can deform it very slightly as indicated by the red arrows.
    • To enter le nouveau filtre d'habitacle in the compartment you can deform it very slightly as indicated by the red arrows.

    • Then push it to the bottom of the compartment.

  6. 
Initially insert the bottom of the door into its lug.
    • Initially insert the bottom of the door into its lug.

    • Push the upper part behind the lever to lock the door

  7. 
Replace the lower panel of the storage compartment, making sure to align the clips with their locations.
    • Replace the lower panel of the storage compartment, making sure to align the clips with their locations.

    • A quick vacuum may be necessary to remove dead leaves and other dirt that has fallen onto your carpet.

  8. 
Start the car and check that the ventilation is working properly.
    • Start the car and check that the ventilation is working properly.

Finish Line

21 other people completed this guide.

Alexandre MARX

Member since: 9/11/16

797 Reputation

3 Guides authored

4 Comments

Clear explanation, done in 1 minute… Thanks!

patrick kopytowski - Resolved on Release Reply

Really very well explained. This tutorial will be very useful. Thank you

Delphine Jacob - Resolved on Release Reply

Très pratique, merci !

Etienne Serra - Resolved on Release Reply

Thanks great I will be able to do it myself

dany TALLEUX - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 57

All Time: 14,582