Difficulty
Easy
Steps
4
Time Required
00:10:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Changing the cabin filter on ALTEA XL from 2012. 2.0L TDI engineChanging the cabin filter on a 2012 Seat ALTEA XL. The filter should be changed approximately every 30,000 km. It is a very simple operation and does not require any tools. The most difficult part is access and visibility.
Tools
No tools specified.
Parts
-
-
The cabin filter is located under the glove box.
-
Driver's side
-
Cover retaining screw
-
Passenger side wheel arch
-
-
-
Under the cover you can see the plastic part that holds the filter in place
-
Tapped hole for the screw from the previous step (helps with location)
-
To remove the filter holder, simply slide it towards the driver's side
-
When you pull on the plastic part, you will at the same time remove the filter
-
-
-
Remove the filter by pulling on it
-
Compare filters before reassembly
-
Old filter
-
New filter
-
Reassembly in the reverse order of disassembly
-
Pay attention to the direction of the filter (chamfer of the filter upwards and on the passenger side)
-
Simple operation to do yourself and without tools.
Simple operation to do yourself and without tools.
Cancel: I did not complete this guide.
3 other people completed this guide.
