Difficulty
Easy
Steps
6
Time Required
00:10:00 - 00:15:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
In this tutorial I will show you the steps to replace the cabin filter on a Renault Megane 4 1.5 dCi 110cv
Parts
-
-
For the complete operation, only a T20 torx key will be needed
-
Be careful, because of the restricted space, a screwdriver will have difficulty entering
-
-
-
For this step, you will need to unclip the cover located at ground level on the left passenger side.
-
-
-
For this stage, visibility is not optimal -
Using a T20 Torx key, unscrew the screw circled in yellow and remove the cover
-
The cover once removed
-
We can finally see the filter in its housing
-
-
-
Remove the filter from its location
-
Compare the dimensions of the two filters
-
Pay careful attention to the direction of the arrow when reassembling.
-
-
-
Clean the filter housing and cover with a cloth.
-
Insert the new filter into the housing.
-
Replace the cover and screw it in.
-
-
-
After screwing the filter cover, start the car and turn on the ventilation.
-
Check that the cover is properly installed and that there is no parasitic air flow.
-
If everything is correct, reinstall the plastic cover removed in step 2.
-
Cancel: I did not complete this guide.
12 other people completed this guide.
11 Comments
Hello, where is the cabin filter on Megane Phase 1, 1996? Thank you.
moro_frederic - Resolved on Release Reply
Thanks for the tutorial… also works for the Talisman
jean-baptiste.gabriel-regis - Resolved on Release Reply
Good morning,
I have a Megane 4 dci 130 year 2016 the filter is not there.
Can you help me?
THANKS
Mario Desposito - Resolved on Release Reply
Hello
I just changed my cabin filter thanks to your tutorial.
just for confirmation the arrow must be pointing towards the console and not the engine?
Michael Charpentier - Resolved on Release Reply
