Introduction
Tutorial made on a Renault Clio 3 Phase 2 1.5 dCi 86 hp
Tools
Parts
Video Overview
-
-
Open the passenger side door
-
The cabin filter is located under the glove box.
-
-
-
Pinch the small tab at the bottom of the filter to pull the filter out.
-
Pull the filter towards you to remove it from its compartment.
-
-
-
Compare the old and the new cabin filter (length, width).
-
Check carefully that the tab and the lug are present on each side of the new cabin filter.
-
-
-
Replace the new filter in its location, do not hesitate to bend the filter to insert it
-
Clip the filter with the bottom tab, check that the filter is properly inserted
-
Quick and very simple operation to perform.
Quick and very simple operation to perform.
Cancel: I did not complete this guide.
17 other people completed this guide.
3 Comments
Turn on the ventilation after changing the filter to ensure that the air flow is correct.
If the filter is incorrectly installed, the flow rate is very low.
Useful video. Easy installation. Well done
It might take a bit of force. I can't do it with pliers and I don't want to force it too much.
