Tools
Parts
Video Overview
-
-
The cabin filter is located under the steering wheel at the bottom right
-
Remove the center console trim by pulling it toward you.
-
-
-
Unscrew and then remove the three screws from the accelerator pedal
-
-
-
In order to synchronize the 2 control gears, lower the temperature to the lowest level and set the blower to the minimum.
-
The black pinion on the control must be set to the high position
-
-
-
Unscrew and remove the 2 screws from the heating control
-
Unclip the connector holding the heating flap control
-
-
-
Compare the old and the new cabin filter(length, width)
-
The arrows on the side of the filter indicate the direction of reassembly.
-
-
-
Reposition the new filter in the box
-
Pay attention to the assembly direction
-
-
-
Reclip the connector holding the heating flap control
-
Replace and tighten the 2 heating control screws
-
Cancel: I did not complete this guide.
4 other people completed this guide.
4 Comments
You can perform the filter change just by disassembling the heating control.
A small problem in the filter when I put the automatic air conditioning filter the blower drops thank you
Good morning,
We are here in the presence of a NISSAN Qashqai 1.5 dCi 106cv
THANKS
Yours sincerely,
The Oscaro Team
since 2014 the cabin filter is on the right passenger side 3 years no update!!!!!