Skip to main content

Video Overview

  1. 
The housing cover is located in the engine compartment.

Pull the tab to remove it.
    • The housing cover is located in the engine compartment.

    • Pull the tab to remove it.

  2. 
Release the 2 tabs on each side to tilt the shutter downwards.

Remove the filter cartridge by pulling on it.

Remove the filter cartridge by pulling on it.
    • Release the 2 tabs on each side to tilt the shutter downwards.

    • Remove the filter cartridge by pulling on it.

  3. 
Clean the filter housing before reassembling, taking care to position the filter cartridge correctly.

The "arrows" on the edge of the filter cartridge must be pointing downwards and the words "airflow" and the cartridge references must be readable in the right place.

Compare the old and le nouveau filtre d'habitacle
    • Clean the filter housing before reassembling, taking care to position the filter cartridge correctly.

    • The "arrows" on the edge of the filter cartridge must be pointing downwards and the words "airflow" and the cartridge references must be readable in the right place.

    • Compare the old and le nouveau filtre d'habitacle

  4. 
Lift the flap upwards to clip the two tabs.

Replace the cover in place.

Start the engine and check that the ventilation and air flow are working properly at all speeds.
    • Lift the flap upwards to clip the two tabs.

    • Replace the cover in place.

    • Start the engine and check that the ventilation and air flow are working properly at all speeds.

Finish Line

6 other people completed this guide.

hemissi-nizar

Member since: 1/16/17

21,087 Reputation

88 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 52

All Time: 8,413