Changing the bulbs of the 3rd brake light on a Peugeot 5008

For this tutorial, you will first need to open your trunk, you will find a black plastic cover inside, you will need to unclip it by pulling it downwards.

Once the plastic cover is removed, unscrew the 2 nuts using a 10 socket wrench.

To access the bulb, you must carefully close your trunk then place the plastic removal tool or a small flat screwdriver on the right side at the end of the light then lever it up to unclip it completely and remove it from its housing.

Remember to go carefully so as not to break the plastic.

Now there are 3 clips on top of the brake light plastic, use a small flat head screwdriver to press the clips and pull towards you to separate the 2 parts of the third brake light.

The bulbs are now accessible, check the one that no longer works then change it by simply pulling on it and replacing a new bulb, respecting its direction.

The model of the bulbs are: 5W5.

When changing the bulbs, remember to switch off the ignition to avoid creating a short circuit when changing the bulbs.

Now remember to repeat the same steps in reverse, checking of course that all the bulbs work.