Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the battery on a Renault Clio 3 Phase 2

Written By: elaunira (and 2 other contributors)
  • Comments: 2
  • Favorites: 0
  • Completions: 6

Difficulty

Easy

Steps

6

Time Required

00:20:00 - 00:30:00

Sections

1

Flags

2

Tutoriel complet

Tutoriel complet

Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

This tutorial explains step by step how to change the battery on a Clio 3 phase 2 from 2012. The different steps are illustrated with photos taken during the battery replacement.

  1. Open the left front door and pull the lever towards you. This will unlock the hood which can then be opened from the outside.

    • Open the left front door and pull the lever towards you. This will unlock the hood which can then be opened from the outside.

    • Open the hood.

    Edit

  2. Remove the two black plastic covers by pressing the clips and gently pulling each cover upwards.

    • Remove the two black plastic covers by pressing the clips and gently pulling each cover upwards.

    Edit

  3. Undo the nut on the negative terminal with a 10 mm open-end wrench, then spread the terminal with a screwdriver to remove it. Remove the two nuts from the positive terminal, then remove the plate underneath.

    • Undo the nut on the negative terminal with a 10 mm open-end wrench, then spread the terminal with a screwdriver to remove it.

    • Remove the two nuts from the positive terminal, then remove the plate underneath.

    Edit

  4. Disconnect the gas exhaust hose from the battery. Remove the square shaped battery retainer using the 13 socket.

    • Disconnect the gas exhaust hose from the battery.

    • Remove the square shaped battery retainer using the 13 socket.

    • Remove the battery from its location.

    Edit

  5. Once the old battery is out of its location, it is easy to remove the positive terminal lug using a 10 mm flat wrench.

    • Once the old battery is out of its location, it is easy to remove the positive terminal lug using a 10 mm flat wrench.

    • Put the terminal you just removed from the old one back on the new battery.

    Edit

  6. Place the new battery in its location. Perform the previous operations in reverse order to reassemble the new battery.

    • Place the new battery in its location.

    • Perform the previous operations in reverse order to reassemble the new battery.

    Edit
Finish Line

6 other people completed this guide.

Author

with 2 other contributors

elaunira

Member since: 09/18/2017

133 Reputation

1 Guide authored

2 Comments

Excellent tutorial. Thank you.

Marianne FRANCOIS - Resolved on Release Reply

Perfect, if you could be more specific about putting the square back in place that would be great. Thanks!

Thomas Berne - Resolved on Release Reply

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 34

Past 30 Days: 138

All Time: 32,832

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.