Changing the battery on Seat Ibiza IV - 1.4 TDi 80ch (FAP) - Tutoriels Oscaro.com

This version may contain incorrect edits. Switch to the latest verified snapshot.

Written By: Cedric Richelot (and 2 other contributors)

Comments: 4
Favorites: 1
Completions: 2

Difficulty

Easy

Steps

5

Time Required

00:30:00

Tools

Parts

Batterie

View

Step 1

This step is untranslated. Help translate it

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Battery location</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Cosse positive</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Battery location</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Cosse positive</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Negative terminal</p></body></html>

Step 2

This step is untranslated. Help translate it

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Start by unscrewing the nut of the negative terminal with the 10 mm socket.</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Do the same with the positive terminal</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Do the same with the positive terminal</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Start by unscrewing the nut of the negative terminal with the 10 mm socket.</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Do the same with the positive terminal</p></body></html>

Step 3

This step is untranslated. Help translate it

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Unscrew the battery retaining plate nut with a ratchet extension and a 13 mm socket</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Remove the battery and clean its support if necessary.</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Compare <strong><a href="https://pieces-auto.oscaro.com/batterie-...>the new battery</a></strong> and the old one</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Unscrew the battery retaining plate nut with a ratchet extension and a 13 mm socket</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Remove the battery and clean its support if necessary.</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Compare <strong><a href="https://pieces-auto.oscaro.com/batterie-...>the new battery</a></strong> and the old one</p></body></html>

Step 4

This step is untranslated. Help translate it

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Check that the negative and positive terminals are in the correct place.</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Screw the battery retaining plate back on</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Check that the negative and positive terminals are in the correct place.</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Screw the battery retaining plate back on</p></body></html>

Step 5

This step is untranslated. Help translate it

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Start by reconnecting and screwing back the negative terminal</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Reconnect and screw the positive terminal back on.</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Reconnect and screw the positive terminal back on.</p></body></html>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Start by reconnecting and screwing back the negative terminal</p></body></html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dt...> <html><body><p>Reconnect and screw the positive terminal back on.</p></body></html>

Finish Line

2 other people completed this guide.

Special thanks to these translators:

fr en

0%

Cedric Richelot

thibaut.ansaldi

dylan.leviavant

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

Cedric Richelot

Member since: 10/11/2016

765 Reputation

10 Guides authored

2 Comments

Hello, logically we reconnect in reverse of disassembly...

bouli - Jul 20, 2023 Resolved on Release Reply

we always finish with the negative terminal because if we put the car back to ground first, the slightest contact with the bodywork or anything else when tightening the positive terminal is an electric shock!

Fabrice TANDOU - Apr 22, 2020 Resolved on Release Reply

View Statistics:

Past 24 Hours: 2

Past 7 Days: 21

Past 30 Days: 60

All Time: 18,025