Skip to main content
  1. 
Open the hood

Remove the 4 engine cover mounting screws.

Remove the engine cover.
    • Open the hood

    • Remove the 4 engine cover mounting screws.

    • Remove the engine cover.

  2. 
Remove the 3 screws with the 8mm socket.

Remove the air inlet line.

Remove the air inlet line.
    • Remove the 3 screws with the 8mm socket.

    • Remove the air inlet line.

  3. 
It brings fresh air to the turbo.

It is fixed to the flow meter by 2 screws which are removed with a 5mm Allen key. It is simply fitted to the turbo and the return hose.

It is fixed to the flow meter by 2 screws which are removed with a 5mm Allen key. It is simply fitted to the turbo and the return hose.
    • It brings fresh air to the turbo.

    • It is fixed to the flow meter by 2 screws which are removed with a 5mm Allen key. It is simply fitted to the turbo and the return hose.

  4. 
Locate the attachment points.

Flow meter output

Back
    • Locate the attachment points.

    • Flow meter output

    • Back

    • Turbo arrival

    • Once the 2 fixing screws are removed, you just have to pull on the pipe to remove it.

  5. 
The connection is on the flow meter.

Apply pressure to each side of the socket and then pull.

Apply pressure to each side of the socket and then pull.
    • The connection is on the flow meter.

    • Apply pressure to each side of the socket and then pull.

  6. 
The air flow meter is attached to the air filter housing by 2 screws. You need an E6 female Torx socket to remove them.

The air flow meter is attached to the air filter housing by 2 screws. You need an E6 female Torx socket to remove them.

The air flow meter is attached to the air filter housing by 2 screws. You need an E6 female Torx socket to remove them.
    • The air flow meter is attached to the air filter housing by 2 screws. You need an E6 female Torx socket to remove them.

  7. 
Compare the old and the new mass flow meter

Reassembly is carried out in reverse order.

Reassembly is carried out in reverse order.
Finish Line

2 other people completed this guide.

laurent.immo13003

Member since: 03/03/2016

12,942 Reputation

155 Guides authored

One Comment

Hello, are there any adjustments to be made following the installation of the new flow meter?

Romain GUIGNARD - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 26

Past 30 Days: 100

All Time: 8,338