Skip to main content
  1. 
remove the plastic protection fasteners.
    • remove the plastic protection fasteners.

    • remove the plastic protection by pulling and lifting it.

  2. 
turn the rods 180° and remove them
    • turn the rods 180° and remove them

  3. 
disconnect the intake manifold
    • disconnect the intake manifold

    • lift the closing tabs of the air filter unit

    • pull the top of the block upwards and remove it

  4. 
Once access to the air filter is clear, remove it

Once access to the air filter is clear, remove it
    • Once access to the air filter is clear, remove it

  5. 
Once the filter block has been cleaned, insert the new filter, first checking the size of the new filter with the old one.
    • Once the filter block has been cleaned, insert the new filter, first checking the size of the new filter with the old one.

    • Repeat each step in reverse order to reassemble the filter unit, the tubing, the plastic protections

Finish Line

One other person completed this guide.

christophe LAIGRE

Member since: 2/12/20

1 Reputation

1 Guide authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 18

All Time: 3,236