Difficulty
Easy
Steps
5
Time Required
00:20:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
'''This tutorial explains how to change the air filter on a Mercedes E-Class W12 (2009 - 2016).
Tools
Parts
-
-
Use a flat screwdriver and turn the screw a quarter turn. Lift the cover slightly then pull it towards you.
-
-
-
First, you need to unclip the gray connector pointed out. It is attached from below with a clip. Pass a small flat screwdriver underneath, and unclip while pushing the connector backwards.
-
Then you have to unclip the cables on each side of the calculator. There are 4 clips. Each connector is held by 2 plastic tabs that must be pushed simultaneously and pulling the clip upwards.
-
-
-
we unscrew the 4 screws (8mm) which hold the calculator, then we slide all the clips holding the side cables, and we tilt everything (cables and calculator) back
-
-
-
you have to unscrew the 7 torx screws that hold the cover. Be careful, some of them come off completely, so do not drop them to the bottom of the engine
-
-
-
There you have it: Remove the filter by lifting it slightly from the back and pulling it backwards (this can be a bit hard...). Clean the air box well (a vacuum cleaner), then install the new filter, taking care to lightly grease the seal, which will make it easier to position.
-
All you have to do now is put everything back together in reverse order. Good luck!
-
Cancel: I did not complete this guide.
2 other people completed this guide.
