Skip to main content

Introduction

This tutorial is made on Renault Mégane 1 phase1 1.4i 75cv

Video Overview

  1. 
Unclip all the fasteners around the air box cover

Unclip all the fasteners around the air box cover

Unclip all the fasteners around the air box cover
    • Unclip all the fasteners around the air box cover

  2. 
Loosen the three screws on the air box cover (you can remove the screws but it is not necessary)

Using a cross-head screwdriver, unscrew and remove the last screw holding the cover in place.

Using a cross-head screwdriver, unscrew and remove the last screw holding the cover in place.
    • Loosen the three screws on the air box cover (you can remove the screws but it is not necessary)

    • Using a cross-head screwdriver, unscrew and remove the last screw holding the cover in place.

  3. 
Remove the cover by pulling upwards then extract the air filter from its location

Blow out the air box to clean out any impurities present in the air box.

Blow out the air box to clean out any impurities present in the air box.
    • Remove the cover by pulling upwards then extract the air filter from its location

    • Blow out the air box to clean out any impurities present in the air box.

  4. 
Compare the old and the new air filter(dimensions)

Compare the old and the new air filter(dimensions)
  5. 
Reposition the air filter in the air box

Reposition the air filter in the air box

Reposition the air filter in the air box
    • Reposition the air filter in the air box

  6. 
Reposition the air box cover

Tighten the screw using a Phillips screwdriver

Tighten the screw using a Phillips screwdriver
    • Reposition the air box cover

    • Tighten the screw using a Phillips screwdriver

  7. 
Using a small click and a 10 socket, tighten the other three screws on the air box cover.

Using a small click and a 10 socket, tighten the other three screws on the air box cover.

Using a small click and a 10 socket, tighten the other three screws on the air box cover.
    • Using a small click and a 10 socket, tighten the other three screws on the air box cover.

  8. 
Reclip all the fasteners around the air box

Reclip all the fasteners around the air box

Reclip all the fasteners around the air box
    • Reclip all the fasteners around the air box

Finish Line

thibaut.ansaldi

Member since: 11/23/2014

84,021 Reputation

196 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 870