Difficulty
Very easy
Steps
3
Time Required
00:05:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Process for cleaning/changing the air filter on Renault 19 (R19) 1.9d phase 2.
Tools
Parts
-
-
Open the hood of the vehicle and locate the air filter housing, located between the fan and the expansion tank.
-
Unscrew the nine Torx screws holding the top of the case. (second image)
-
Remove it and reveal your air filter.
-
-
-
Remove the filter, being careful not to let dust or other dead leaves fall into the hole. (circled in blue) which is none other than the engine air intake.
-
Check the condition of the filter, which should ideally be changed, or in the meantime, cleaned by carefully blowing it over.
-
Clean the inside of the housing, carefully removing the dirt that systematically accumulates under the filter (third image) always being careful not to let anything enter the air intake.
-
For peace of mind, place a clean cloth in the intake port to protect it.
-
-
-
Put the filter back in place, remembering to remove any cloth you may have used during cleaning.
-
Close the case, remembering the ninth screw.
-
Cancel: I did not complete this guide.
4 other people completed this guide.
One Comment
I have been doing this operation myself since 1995 on my car and it is very well explained.
