Difficulty
Easy
Steps
6
Time Required
00:20:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Tutorial made on Peugeot 2008 1.6 HDI 115
Parts
-
-
Remove the engine plate
-
Locate the air filter
-
-
-
Unscrew the 3 T25 screws
-
Open the air box
-
-
-
Remove the air filter
-
Clean the air box
-
-
-
Check the dimensions between the old and new air filter (length, width, shape)
-
-
-
Install the new filter
-
Close the air box
-
Aim the 3 T25 screws
-
-
-
Replace the engine plate
-
Cancel: I did not complete this guide.
8 other people completed this guide.
4 Comments
Hello
Yes, especially to remove the small air sensor.
Don't break the connection!
lev.michel - Resolved on Release Reply
OSCAR HO never explains the tricks to undo electrical outlets???
jacky leydier - Resolved on Release Reply
Yes, it's true that it's a shame.
Plugs and other connections are sometimes difficult to remove without a tutorial.
I would have liked to see a tutorial for the 2008 1.2 THP puretech 12v 110hp
Thierry Tétaud - Resolved on Release Reply
