Skip to main content

Introduction

Tutorial made on Peugeot 2008 1.6 HDI 115

  1. 
Remove the engine plate

Locate the air filter

Locate the air filter
    • Remove the engine plate

    • Locate the air filter

  2. 
Unscrew the 3 T25 screws

Open the air box

Open the air box
    • Unscrew the 3 T25 screws

    • Open the air box

  3. 
Remove the air filter

Clean the air box

Clean the air box
    • Remove the air filter

    • Clean the air box

  4. 
Check the dimensions between the old and new air filter (length, width, shape)

Check the dimensions between the old and new air filter (length, width, shape)
    • Check the dimensions between the old and new air filter (length, width, shape)

  5. 
Install the new filter

Close the air box

Aim the 3 T25 screws
    • Install the new filter

    • Close the air box

    • Aim the 3 T25 screws

  6. 
Replace the engine plate
    • Replace the engine plate

Finish Line

8 other people completed this guide.

dlychar

Member since: 10/09/2017

10,143 Reputation

70 Guides authored

4 Comments

Hello

Yes, especially to remove the small air sensor.

Don't break the connection!

lev.michel - Reply

OSCAR HO never explains the tricks to undo electrical outlets???

jacky leydier - Reply

Yes, it's true that it's a shame.

Plugs and other connections are sometimes difficult to remove without a tutorial.

Didier VILLEMINEY -

I would have liked to see a tutorial for the 2008 1.2 THP puretech 12v 110hp

Thierry Tétaud - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 18

Past 30 Days: 63

All Time: 12,138