Introduction
The model presented is a Citroën Saxo Phase 2 1.1 i 60cv
Tools
Parts
-
-
Identify the air box.
-
Loosen the metal clamp on the air intake hose using a Phillips screwdriver.
-
Do not loosen it completely but just enough so that it can slide freely.
-
Pull the air intake hose toward you to detach it from the air box.
-
Disconnect the breather hose by pressing on the yellow part and pulling towards you.
-
Loosen the metal clamp at the air box outlet. (without loosening it completely)
-
Pull the air box to the right to disconnect it and remove it from the engine compartment.
-
-
-
Using a large cross-head screwdriver, unscrew the 5 screws on the air box cover. Then lift the cover.
-
Remove the old air filter
-
Remove any dirt that is in the air box.
-
Check the correspondence between le nouveau filtre à air and the old one
-
-
-
Place the new filter in the same direction as the old one in the air box.
-
Close the air box by tightening the 5 screws.
-
Do not tighten too hard as the air box is plastic.
-
Place the air box back in the engine compartment.
-
Proceed in the reverse order of disassembly to reconnect the air box.
-
Cancel: I did not complete this guide.
9 other people completed this guide.
3 Comments
Very well explained. Many thanks for this simple but very useful tutorial! This is exactly what is needed! Keep it up!!
chassaingmarc - Resolved on Release Reply
Thank you very much for this great tutorial with very nice pictures, I did it myself everything works perfectly!
romain602012 - Resolved on Release Reply
