Introduction
The model presented is a Citroën Saxo Phase 2 1.1 i 60cv
Tools
Parts
-
-
Identify the air box.
-
Loosen the metal clamp on the air intake hose using a Phillips screwdriver.
-
Do not loosen it completely but just enough so that it can slide freely.
-
Pull the air intake hose toward you to detach it from the air box.
-
Disconnect the breather hose by pressing on the yellow part and pulling towards you.
-
Loosen the metal clamp at the air box outlet. (without loosening it completely)
-
Pull the air box to the right to disconnect it and remove it from the engine compartment.
-
-
-
Using a large cross-head screwdriver, unscrew the 5 screws on the air box cover. Then lift the cover.
-
Remove the old air filter
-
Remove any dirt that is in the air box.
-
Check the correspondence between the new air filter and the old one
-
-
-
Place the new filter in the same direction as the old one in the air box.
-
Close the air box by tightening the 5 screws.
-
Do not tighten too hard as the air box is plastic.
-
Place the air box back in the engine compartment.
-
Proceed in the reverse order of disassembly to reconnect the air box.
-
Cancel: I did not complete this guide.
9 other people completed this guide.
3 Comments
Very well explained. Many thanks for this simple but very useful tutorial! This is exactly what is needed! Keep it up!!
Thank you very much for this great tutorial with very nice pictures, I did it myself everything works perfectly!
it's really a breeze thank you
