Introduction
Simply change the air filter of your C3 Aircross 110 hp PureTech
All you need is an angled Torx 20 screwdriver (because there is little space for a long tool) and a new air filter
Tools
Parts
-
-
Unclip the sensor on the front between the two TORX screws by pulling on it, without tools
-
-
-
Disassemble the filter compartment from the air outlet pipe by separating it without tools
-
-
-
Unclip the side clip by pulling it to the side
-
Remove the air filter cover
-
And put it outside the hood
-
-
-
Remove the air filter and compare it with the old one to check the dimensions
-
-
-
Reposition the cover by placing the notch at the back first
-
Assemble filter compartment with air outlet
-
Tighten the 2 TORX screws
-
Finally, replace the sensor on the front face
-
Cancel: I did not complete this guide.
One other person completed this guide.
4 Comments
this is not the procedure to change the air filter of the c3aircross1,2 purtech of 2017
If I confirm, it is indeed this vehicle 1.2 PureTech 12V S&S 110 hp