Introduction
How to change the air filter on a 1997 BMW Z3 2.8i (M52 engine, single vanos, phase 1 and manual gearbox)
Tools
Parts
-
-
Open the engine hood and locate the air box
-
The air box cover is held in place by two clips
-
-
-
Push the tab towards the air box
-
At the same time, pull the drawer slightly upwards
-
Do the same operation on the second staple.
-
-
-
Once the clips are unlocked, pull the air box drawer to remove it.
-
-
-
The air filter is located in the drawer
-
Pull on the edges of the filter to remove it from the drawer
-
-
-
Replace the new air filter in the drawer, positioning the filter seal correctly on the outline of the drawer.
-
The filter gasket should be slightly oily to ensure a certain seal.
-
-
-
Position the cover in its location, with the top of the filter facing the air box.
-
Push the cover all the way into its location
-
-
-
Push the drawer to the bottom of the air box until the two clips engage.
-
-
-
Cancel: I did not complete this guide.
One other person completed this guide.