Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the accessory kit on Volkswagen Passat B6

Written By: dlychar (and 2 other contributors)
  • Comments: 1
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

11

Time Required

00:45:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

tutorial made on Volkswagen Passat 1.9 TDI 105

  1. Lift the vehicle Remove the right front wheel Remove the right front wheel

    • Lift the vehicle

    • Remove the right front wheel

    Edit

  2. Unscrew the 11 T25 and T40 screws Remove the under-engine plate

    • Unscrew the 11 T25 and T40 screws

    • Remove the under-engine plate

    Edit

  3. Unscrew the 4 T25 screws Remove the wheel arch

    • Unscrew the 4 T25 screws

    • Remove the wheel arch

    Edit

  4. Remove the engine cover by pulling upwards Remove the engine cover by pulling upwards

    • Remove the engine cover by pulling upwards

    Edit

  5. Using an 18 mm flat wrench, loosen the tensioner roller. Insert a pin to block the tensioner roller in order to remove the belt Insert a pin to block the tensioner roller in order to remove the belt

    • Using an 18 mm flat wrench, loosen the tensioner roller.

    • Insert a pin to block the tensioner roller in order to remove the belt

    Edit

  6. Remove the accessory belt Check that the new belt matches the old one

    • Remove the accessory belt

    • Check that the new belt matches the old one

    Edit

  7. Unscrew the two 16 mm screws Remove the tensioner roller

    • Unscrew the two 16 mm screws

    • Remove the tensioner roller

    Edit

  8. Check that the two tensioner rollers match

    • Check that the two tensioner rollers match

    Edit

  9. Install the new tensioner roller Tighten the two 16 screws

    • Install the new tensioner roller

    • Tighten the two 16 screws

    Edit

  10. Install the new accessory belt Using the 18 mm flat wrench, tighten the roller and remove the roller pin.

    • Install the new accessory belt

    • Using the 18 mm flat wrench, tighten the roller and remove the roller pin.

    Edit

  11. Reassemble the plate under the engine Reassemble the wheel arch Reassemble the wheel and tighten it to the torque

    • Reassemble the plate under the engine

    • Reassemble the wheel arch

    • Reassemble the wheel and tighten it to the torque

    • Put the vehicle back on the ground

    Edit
Finish Line

2 other people completed this guide.

Author

with 2 other contributors

dlychar

Member since: 10/09/2017

10,143 Reputation

70 Guides authored

One Comment

Thank you very much, very clear, perfect

ROUDANI - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 19

Past 30 Days: 68

All Time: 6,121

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.