Skip to main content

Tools

No tools specified.

  1. 
Remove the rubber cover by pulling the tab backwards

Remove the rubber cover by pulling the tab backwards
    • Remove the rubber cover by pulling the tab backwards

  2. 
Gently pull the connector straight back to disconnect it

Gently pull the connector straight back to disconnect it
    • Gently pull the connector straight back to disconnect it

  3. 
Unclip the bulb by applying light pressure to the top of the clip using a lateral movement.

Swing the clip all the way down to remove the bulb.

Compare the new bulb with the old one.
    • Unclip the bulb by applying light pressure to the top of the clip using a lateral movement.

    • Swing the clip all the way down to remove the bulb.

    • Compare the new bulb with the old one.

  4. 
Put the new bulb in place with the lug facing upwards

Put the clip back
    • Put the new bulb in place with the lug facing upwards

    • Put the clip back

    • Replace the electrical connector

  5. 
Replace the bulb cover
    • Replace the bulb cover

    • Turn on the headlight to check that it is working properly.

Finish Line

3 other people completed this guide.

Nicolas Dajoux

Member since: 09/13/2016

2,016 Reputation

8 Guides authored

7 Comments

Hello, I lost the rubber cover that protects against dust.

Under what reference can I find some?

Thank you!

mariek76 - Reply

Hello, I don't have a rubber cover.

pigachelionel - Reply

It helped me a lot, thank you!!!

plenitude91 - Reply

Hello and thank you very much for your help, best regards

Reda GOUMIDI - Reply

Hello, I am looking for someone to tell me how to remove a turn signal bulb on the front of the vehicle because it is very difficult to remove from the location on a Peugeot Partner Tepee. What should be removed? Thank you, it is clearly visible at the engine level...

Stéphane Vancauwelaert - Reply

Add Comment

View Statistics:

Past 24 Hours: 13

Past 7 Days: 145

Past 30 Days: 661

All Time: 49,151