Difficulty
Very easy
Steps
4
Time Required
00:05:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Replacing a bulb (front right or left) of dipped beam headlight for Peugeot 407
Tools
-
-
Lift the hood release lever on the driver's side.
-
Reach under the hood and lift the tab.
-
-
-
Remove the soft cover from the bulb holder
-
Remove the tabs that hold the bulb in place
-
The bulb is now free and can be removed from the headlight
-
-
-
Remove the bulb from its plug
-
Compare the defective bulb and its replacement
-
-
-
Insert the new bulb into the socket and reposition it in its holder
-
Replace the tabs in position to hold the bulb in place
-
Reassemble the soft cover
-
Check that the bulb is working properly and then close the vehicle's hood.
-
Cancel: I did not complete this guide.
7 other people completed this guide.
7 Comments
Hello. I change the right bulb that is out of order with a new one: nothing! I exchange it with a left bulb that is in good condition: nothing!! The fuse then? But which one??? Thank you for your help
thy.prevost65 - Resolved on Release Reply
There is a typo: The bulb is now free and can be removed from the headlight (pulled out instead of removed).
Other than that the tutorial is very good.
Pierre Torasso
pierre.torasso - Resolved on Release Reply
By the way, your tutorial is very clear and quite simple to follow. Thank you.
Alain THOMAS - Resolved on Release Reply
