Skip to main content
  1. 
open the hood
    • open the hood

    • here is where the filter is

  2. 
Spread the 2 scrap metal legs then remove the filter

in photo n°2 the filter has come out of its location
    • Spread the 2 scrap metal legs then remove the filter

    • in photo n°2 the filter has come out of its location

  3. 
Using the flat screwdriver, loosen the 2 hose clamps then remove the 2 hoses.

In the 2nd photo we can see the clamps better.
    • Using the flat screwdriver, loosen the 2 hose clamps then remove the 2 hoses.

    • In the 2nd photo we can see the clamps better.

    • Remove filter

  4. 
compare old and new fuel filter (length, diameter)

compare old and new fuel filter (length, diameter)
    • compare old and new fuel filter (length, diameter)

  5. 
The arrow on the side of the filter indicates the direction of reassembly of the fuel filter.

put the filter back in its place then put the 2 hoses back
    • The arrow on the side of the filter indicates the direction of reassembly of the fuel filter.

    • put the filter back in its place then put the 2 hoses back

    • tighten the 2 clamps with the flat screwdriver

  6. 
Start your engine the filter will fill with gasoline and the engine will start
    • Start your engine the filter will fill with gasoline and the engine will start

Finish Line

3 other people completed this guide.

thosca205306

Member since: 02/10/2017

2,379 Reputation

32 Guides authored

One Comment

!!! the filter mounts well arrow down as well as the writing !!!

this does not indicate the meaning of the essence in any way!!!!

jeannel-magali - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 46

All Time: 7,077